As generated documentation files are no longer stored in the BIND Git
repository, put a copy of the PDF version of the BIND ARM generated by
the "docs" GitLab CI job into the Windows zips to make it easily
available to the end users on that platform.
Make sure Windows zips also contain certain documentation files included
in source tarballs to make the contents of each release more consistent
across different platforms.
The CDS/CDNSKEY record will be published when the DS is in the
rumoured state. However, with the introduction of the rndc '-checkds'
command, the logic in the keymgr was changed to prevent the DS
state to go in RUMOURED unless the specific command was given. Hence,
the CDS was never published before it was seen in the parent.
Initially I thought this was a policy approval rule, however it is
actually a DNSSEC timing rule. Remove the restriction from
'keymgr_policy_approval' and update the 'keymgr_transition_time'
function. When looking to move the DS state to OMNIPRESENT it will
no longer calculate the state from its last change, but from when
the DS was seen in the parent, "DS Publish". If the time was not set,
default to next key event of an hour.
Similarly for moving the DS state to HIDDEN, the time to wait will
be derived from the "DS Delete" time, not from when the DS state
last changed.
Before this commit, BIND was unable to resolve ip6.arpa names like
the one reported in issue #1847 when using query minimization.
As reported in the issue, an attempt to resolve a name like
'rec-test-dom-158937817846788.test123.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.2.0.3.4.3.5.4.0.8.2.6.0.1.0.0.2.ip6.arpa'
using default settings would fail.
The reason was that query minimization algorithm in 'fctx_minimize_qname'
would divide any ip6.arpa names in increasing number of labels,
7,11, ... up to 35, thus limiting the destination name (minimized) to a number
of 35 labels.
In case the last query minimization attempt (with 35 labels) would fail with
NXDOMAIN, BIND would attempt the query mininimization again with the exact
same QNAME, limited on the 35 labels, and that in turn would fail again.
This fix avoids this fail loop by considering the extra labels that may appear
in the leftmost part of an ip6.arpa name, those after the IPv6 part.
While
if (isc_refcount_decrement() == 1) { // memory_order_release
isc_refcount_destroy(); // memory_order_acquire
...
}
is theoretically the most efficent in practice, using
memory_order_acq_rel produces the same code on x86_64 and doesn't
trigger tsan data races (which use a idealistic model) if
isc_refcount_destroy() is not called immediately. In fact
isc_refcount_destroy() could be removed if we didn't want
to check for the count being 0 when isc_refcount_destroy() is
called.
https://stackoverflow.com/questions/49112732/memory-order-in-shared-pointer-destructor
It was discovered, that some systems might set EPROTO instead of EACCESS
on recvmsg() call causing spurious syslog messages from the socket
code. This commit returns soft handling of EPROTO errno code to the
socket code. [GL #1928]
When calculating the new hashtable bitsize, there was an off-by-one
error that would allow the new bitsize to be larger than maximum allowed
causing assertion failure in the rehash() function.
The rbtdb version glue_table has been refactored similarly to rbt.c hash
table, so it does use 32-bit hash function return values and apply
Fibonacci Hashing to lookup the index to the hash table instead of
modulo. For more details, see the lib/dns/rbt.c commit log.
Shifting (signed) integer left could trigger undefined behaviour when
the shifted value would overflow into the sign bit (e.g. 2048).
The issue was found when using AFL++ and UBSAN:
message.c:2274:33: runtime error: left shift of 2048 by 20 places cannot be represented in type 'int'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior message.c:2274:33 in
sockaddr.c:147:49: error: pointer targets in passing argument 2 of ‘isc__buffer_putmem’ differ in signedness
rdata.c:1780:30: error: pointer targets in passing argument 2 of ‘isc__buffer_putmem’ differ in signedness
This commit updates and simplifies the checks for the readline support
in nslookup and nsupdate:
* Change the autoconf checks to pkg-config only, all supported
libraries have accompanying .pc files now.
* Add editline support in addition to libedit and GNU readline
* Add isc/readline.h shim header that defines dummy readline()
function when no readline library is available
base32_decode_char() added a extra zero octet to the output
if the fifth character was a pad character. The length
of octets to copy to the output was set to 3 instead of 2.
Hold a weak reference to the view so that it can't go away while
nta is performing its lookups. Cancel nta timers once all external
references to the view have gone to prevent them triggering new work.
The hash table rework MRs (!3865, !3871) increased the default RBT hash
table size from 64 to 65,536 entries (for 64-bit architectures, that is
512 bytes before vs. 524,288 bytes after). This works fine for RBTs
used for cache databases, but since three separate RBT databases are
created for every zone loaded (RRs, NSEC, NSEC3), memory usage would
skyrocket when BIND 9 is used as an authoritative DNS server with many
zones.
The default RBT hash table size before the rework was 64 entries, this
commit reduces it to 16 entries because our educated guess is that most
zones are just couple of entries (SOA, NS, A, AAAA, MX) and rehashing
small hash tables is actually cheap. The rework we did in the previous
MRs tries to avoid growing the hash tables for big-to-huge caches where
growing the hash table comes at a price because the whole cache needs to
be locked.
(cherry picked from commit 1e043a011b)
The hash table rework MRs (!3865, !3871) increased the default RBT hash
table size from 64 to 65,536 entries (for 64-bit architectures, that is
512 bytes before vs. 524,288 bytes after). This works fine for RBTs
used for cache databases, but since three separate RBT databases are
created for every zone loaded (RRs, NSEC, NSEC3), memory usage would
skyrocket when BIND 9 is used as an authoritative DNS server with many
zones.
The default RBT hash table size before the rework was 64 entries, this
commit reduces it to 16 entries because our educated guess is that most
zones are just couple of entries (SOA, NS, A, AAAA, MX) and rehashing
small hash tables is actually cheap. The rework we did in the previous
MRs tries to avoid growing the hash tables for big-to-huge caches where
growing the hash table comes at a price because the whole cache needs to
be locked.
Don't strip off the final character when printing times in key files.
With the introduction of 'rndc dnssec -status' we introduced
'isc_stdtime_tostring()'. This changed in behavior such that it was no
longer needed to strip of the final '\n' of the string format
datetime. However, in 'printtime()' it still stripped the final
character.
Add a new 'rndc' command 'dnssec -checkds' that allows the user to
signal named that a new DS record has been seen published in the
parent, or that an existing DS record has been withdrawn from the
parent.
Upon the 'checkds' request, 'named' will write out the new state for
the key, updating the 'DSPublish' or 'DSRemoved' timing metadata.
This replaces the "parent-registration-delay" configuration option,
this was unreliable because it was purely time based (if the user
did not actually submit the new DS to the parent for example, this
could result in an invalid DNSSEC state).
Because we cannot rely on the parent registration delay for state
transition, we need to replace it with a different guard. Instead,
if a key wants its DS state to be moved to RUMOURED, the "DSPublish"
time must be set and must not be in the future. If a key wants its
DS state to be moved to UNRETENTIVE, the "DSRemoved" time must be set
and must not be in the future.
By default, with '-checkds' you set the time that the DS has been
published or withdrawn to now, but you can set a different time with
'-when'. If there is only one KSK for the zone, that key has its
DS state moved to RUMOURED. If there are multiple keys for the zone,
specify the right key with '-key'.
