* The location of the digest type field has changed to where the
reserved field was.
* The reserved field is now called scheme and is where the digest
type field was.
* Digest type 2 has been defined (SHA256).
This commit changes the taskmgr to run the individual tasks on the
netmgr internal workers. While an effort has been put into keeping the
taskmgr interface intact, couple of changes have been made:
* The taskmgr has no concept of universal privileged mode - rather the
tasks are either privileged or unprivileged (normal). The privileged
tasks are run as a first thing when the netmgr is unpaused. There
are now four different queues in in the netmgr:
1. priority queue - netievent on the priority queue are run even when
the taskmgr enter exclusive mode and netmgr is paused. This is
needed to properly start listening on the interfaces, free
resources and resume.
2. privileged task queue - only privileged tasks are queued here and
this is the first queue that gets processed when network manager
is unpaused using isc_nm_resume(). All netmgr workers need to
clean the privileged task queue before they all proceed normal
operation. Both task queues are processed when the workers are
finished.
3. task queue - only (traditional) task are scheduled here and this
queue along with privileged task queues are process when the
netmgr workers are finishing. This is needed to process the task
shutdown events.
4. normal queue - this is the queue with netmgr events, e.g. reading,
sending, callbacks and pretty much everything is processed here.
* The isc_taskmgr_create() now requires initialized netmgr (isc_nm_t)
object.
* The isc_nm_destroy() function now waits for indefinite time, but it
will print out the active objects when in tracing mode
(-DNETMGR_TRACE=1 and -DNETMGR_TRACE_VERBOSE=1), the netmgr has been
made a little bit more asynchronous and it might take longer time to
shutdown all the active networking connections.
* Previously, the isc_nm_stoplistening() was a synchronous operation.
This has been changed and the isc_nm_stoplistening() just schedules
the child sockets to stop listening and exits. This was needed to
prevent a deadlock as the the (traditional) tasks are now executed on
the netmgr threads.
* The socket selection logic in isc__nm_udp_send() was flawed, but
fortunatelly, it was broken, so we never hit the problem where we
created uvreq_t on a socket from nmhandle_t, but then a different
socket could be picked up and then we were trying to run the send
callback on a socket that had different threadid than currently
running.
It is more intuitive to have the countdown 'max-stale-ttl' as the
RRset TTL, instead of 0 TTL. This information was already available
in a comment "; stale (will be retained for x more seconds", but
Support suggested to put it in the TTL field instead.
Commit fa505bfb0e omitted two unit tests
while introducing the SKIP_TEST_EXIT_CODE preprocessor macro. Fix the
outliers to make use of SKIP_TEST_EXIT_CODE consistent across all unit
tests. Also make sure lib/dns/tests/dnstap_test returns an exit code
that indicates a skipped test when dnstap is not enabled.
When using the `unixtime` or `date` method to update the SOA serial,
`named` and `dnssec-signzone` would silently fallback to `increment`
method to prevent the new serial number to be smaller than the old
serial number (using the serial number arithmetics). Add a warning
message when such fallback happens.
Make sure pointer checks in unit tests use cmocka assertion macros
dedicated for use with pointers instead of those dedicated for use with
integers or booleans.
Add unit test to ensure the right NSEC3PARAM event is scheduled in
'dns_zone_setnsec3param()'. To avoid scheduling and managing actual
tasks, split up the 'dns_zone_setnsec3param()' function in two parts:
1. 'dns__zone_lookup_nsec3param()' that will check if the requested
NSEC3 parameters already exist, and if a new salt needs to be
generated.
2. The actual scheduling of the new NSEC3PARAM event (if needed).
The dns_message_create() function cannot soft fail (as all memory
allocations either succeed or cause abort), so we change the function to
return void and cleanup the calls.
The clang 12 has a new warning that warns when using multi-line strings
in the string arrays, f.e.:
{ "aa",
"b"
"b",
"cc" }
would generate warning like this:
private_test.c:162:7: error: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Werror,-Wstring-concatenation]
"33333/RSASHA1" };
^
private_test.c:161:7: note: place parentheses around the string literal to silence warning
"Done removing signatures for key "
^
private_test.c:197:7: error: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Werror,-Wstring-concatenation]
"NSEC chain",
^
private_test.c:196:7: note: place parentheses around the string literal to silence warning
"Removing NSEC3 chain 1 0 30 DEAF / creating "
^
2 errors generated.
Make various adjustments necessary to enable "make dist" to build a BIND
source tarball whose contents are complete enough to build binaries, run
unit & system tests, and generate documentation on Unix systems.
Known outstanding issues:
- "make distcheck" does not work yet.
- Tests do not work for out-of-tree source-tarball-based builds.
- Source tarballs are not complete enough for building on Windows.
All of the above will be addressed in due course.
This adds a unit test driver for BIND with Automake. It runs the unit
test program provided as its sole command line argument and then looks
for a core dump generated by that test program. If one is found, the
driver prints the backtrace into the test log.
Add recursive "test" and "unit" rules, which execute "make check"
in specific directories - "make test" runs the system tests, and
"make unit" runs the unit tests.
The three libdns tests directly include ../dst_internal.h which
in turn directly include openssl headers, thus there was a missing
path and build failure on systems where OpenSSL is not in the default
include path.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
The isc_mem API now crashes on memory allocation failure, and this is
the next commit in series to cleanup the code that could fail before,
but cannot fail now, e.g. isc_result_t return type has been changed to
void for the isc_log API functions that could only return ISC_R_SUCCESS.
- change name of 'bytes' to 'xfrsize' in dns_db_getsize() parameter list
and related variables; this is a more accurate representation of what
the function is doing
- change the size calculations in dns_db_getsize() to more accurately
represent the space needed for a *XFR message or journal file to contain
the data in the database. previously we returned the sizes of all
rdataslabs, including header overhead and offset tables, which
resulted in the database size being reported as much larger than the
equivalent *XFR or journal.
- map files caused a particular problem here: the fullname can't be
determined from the node while a file is being deserialized, because
the uppernode pointers aren't set yet. so we store "full name length"
in the dns_rbtnode structure while serializing, and clear it after
deserialization is complete.
When --with-zlib is passed to ./configure (or when the latter
autodetects zlib's presence), libisc uses certain zlib functions and
thus libisc's users should be linked against zlib in that case. Adjust
Makefile variables appropriately to prevent shared build failures caused
by underlinking.
* ctx needs to be destroyed before it is regenerated.
* emit the name of the signature to be replaced.
* cleanup memory before asserting so post longjump doesn't detect a
memory leak.
* comment code.
This commit simplifies the cachedb rrset statistics in two ways:
- Introduce new rdtypecounter arithmetics, allowing bitwise
operations.
- Remove the special DLV statistic counter.
New rdtypecounter arithmetics
-----------------------------
"The rdtypecounter arithmetics is a brain twister". Replace the
enum counters with some defines. A rdtypecounter is now 8 bits for
RRtypes and 3 bits for flags:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| | | | | | S |NX| RRType |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
If the 8 bits for RRtype are all zero, this is an Other RRtype.
Bit 7 is the NXRRSET (NX) flag and indicates whether this is a
positive (0) or a negative (1) RRset.
Then bit 5 and 6 mostly tell you if this counter is for an active,
stale, or ancient RRtype:
S = 0x00 means Active
S = 0x01 means Stale
S = 0x10 means Ancient
Since a counter cannot be stale and ancient at the same time, we
treat S = 0x11 as a special case to deal with NXDOMAIN counters.
S = 0x11 indicates an NXDOMAIN counter and in this case the RRtype
field signals the expiry of this cached item:
RRType = 0 means Active
RRType = 1 means Stale
RRType = 2 means Ancient
This also removes counting the DLV RRtype separately. Since we have
deprecated the lookaside validation it makes no sense to keep this
special statistic counter.
The isc_buffer_allocate() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_buffer_allocate() now returns void.
it now removes matching trust anchors from from the dslist while leaving
the other trust anchors in place.
also cleaned up the API to remove functions that were never being used.
NOTE: the keytable test is still failing because dns_keytable_deletekey()
is looking for exact matches in keynodes containing dst_key objects,
which no keynode has anymore.
the internal keytable structure has not yet been changed, but
insertion of DS anchors is the only method now available.
NOTE: the keytable unit test is currently failing because of tests
that expect individual keynode objects to contain single DST key
objects.
as initial-key and static-key trust anchors will now be stored as a
DS rrset, code referencing keynodes storing DNSKEY trust anchors will
no longer be reached.
this function is used by dns_view_untrust() to handle revoked keys, so
it will still be needed after the keytable/validator refactoring is
complete, even though the keytable will be storing DS trust anchors
instead of keys. to simplify the way it's called, it now takes a DNSKEY
rdata struct instead of a DST key.
Only comparing the value of the integer passed as the last argument to
MMDB_lookup_sockaddr() against MMDB_SUCCESS is not enough to ensure that
an MMDB lookup was successful - the 'found_entry' field of the
MMDB_lookup_result_s structure returned by that function also needs to
be true or else the remaining contents of that structure should be
ignored as the lookup failed. Extend the relevant logical condition in
get_entry_for() to ensure the latter does not return incorrect MMDB
entries for IP addresses which do not belong to any subnet defined in a
given GeoIP2 database.
Previously, the dns_geoip API used isc_thread_key API for TLS, which is
fairly complicated and requires initialization of memory contexts, etc.
This part of code was refactored to use a ISC_THREAD_LOCAL pointer which
greatly simplifies the whole code related to storing TLS variables, and
creating the local memory context was moved to named and stored in the
named_g_geoip global context.
Previously, the dns_dt API used isc_thread_key API for TLS, which is
fairly complicated and requires initialization of memory contexts, etc.
This part of code was refactored to use a ISC_THREAD_LOCAL pointer which
greatly simplifies the whole code related to storing TLS variables.
The indentation for dumping the master zone was driven by two
global variables dns_master_indent and dns_master_indentstr. In
threaded mode, this becomes prone to data access races, so this commit
converts the global variables into a local per-context tuple that
consist of count and string.
note: this is a frankensteinian kluge which needs further refactoring.
the keytable started as an RBT where the node->data points to a list of
dns_keynode structures, each of which points to a single dst_key.
later it was modified so that the list could instead point to a single
"null" keynode structure, which does not reference a key; this means
a trust anchor has been configured but the RFC 5011 refresh failed.
in this branch it is further updated to allow the first keynode in
the list to point to an rdatalist of DS-style trust anchors. these will
be used by the validator to populate 'val->dsset' when validating a zone
key.
a DS style trust anchor can be updated as a result of RFC 5011
processing to contain DST keys instead; this results in the DS list
being freed. the reverse is not possible; attempting to add a DS-style
trust anchor if a key-style trust anchor is already in place results
in an error.
later, this should be refactored to use rdatalists for both DS-style
and key-style trust anchors, but we're keeping the existing code for
old-style trust anchors for now.
When a task manager is created, we can now specify an `isc_nm`
object to associate with it; thereafter when the task manager is
placed into exclusive mode, the network manager will be paused.
Related scan-build report:
dnstap_test.c:169:2: warning: Value stored to 'result' is never read
result = dns_test_makeview("test", &view);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dnstap_test.c:193:2: warning: Value stored to 'result' is never read
result = dns_compress_init(&cctx, -1, dt_mctx);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
Currently, the lib/dns/tests/tkey_test unit test is only run when the
linker supports the --wrap option. However, linker support for that
option is only needed for static builds. As a result, the unit test
mentioned before is not being run everywhere it can be run as even for
builds done using --with-libtool, the test is not run unless the linker
supports the --wrap option.
Tweak preprocessor directives in lib/dns/tests/tkey_test.c so that this
test is run:
- for all builds using --with-libtool,
- for static builds done using a linker supporting the --wrap option.
Weak symbols are handled differently by different dynamic linkers. With
glibc, lib/dns/tests/tkey_test works as expected no matter whether
--with-libtool is used or not: __attribute__((weak)) prevents a static
build from failing and it just so happens that the desired symbols are
picked at runtime for dynamic builds. However, with BSD libc, the
libdns functions called from lib/dns/tests/tkey_test.c use the "real"
memory allocation functions from libisc, thus breaking that unit test.
(Note: similar behavior can be reproduced with glibc by setting the
LD_DYNAMIC_WEAK environment variable.)
The simplest way to make lib/dns/tests/tkey_test work reliably is to
drop all uses of __attribute__((weak)) in it - this way, the memory
functions inside lib/dns/tests/tkey_test.c will always be used instead
of the "real" libisc ones for dynamic builds. However, this would not
work with static builds as it would result in multiple strong symbols
with the same name being present in a single binary.
Work around the problem by only compiling in the overriding definitions
of memory functions when building using --with-libtool. For static
builds, keep relying on the --wrap linker option for replacing calls to
the functions we are interested in.
Having the decrement/increment logic in stats makes the code hard
to follow. Remove it here and adjust the unit test. The caller
will be responsible for maintaining the correct increments and
decrements for statistics counters (in the following commit).
Previously isc_thread_join() would return ISC_R_UNEXPECTED on a failure to
create new thread. All such occurences were caught and wrapped into assert
function at higher level. The function was simplified to assert directly in the
isc_thread_join() function and all caller level assertions were removed.
Previously isc_thread_create() would return ISC_R_UNEXPECTED on a failure to
create new thread. All such occurences were caught and wrapped into assert
function at higher level. The function was simplified to assert directly in the
isc_thread_create() function and all caller level assertions were removed.
Make sure all unit tests include headers in a similar order:
1. Three headers which must be included before <cmocka.h>.
2. System headers.
3. UNIT_TESTING definition, followed by the <cmocka.h> header.
4. libisc headers.
5. Headers from other BIND libraries.
6. Local headers.
Also make sure header file names are sorted alphabetically within each
block of #include directives.
All unit tests define the UNIT_TESTING macro, which causes <cmocka.h> to
replace malloc(), calloc(), realloc(), and free() with its own functions
tracking memory allocations. In order for this not to break
compilation, the system header declaring the prototypes for these
standard functions must be included before <cmocka.h>.
Normally, these prototypes are only present in <stdlib.h>, so we make
sure it is included before <cmocka.h>. However, musl libc also defines
the prototypes for calloc() and free() in <sched.h>, which is included
by <pthread.h>, which is included e.g. by <isc/mutex.h>. Thus, unit
tests including "dnstest.h" (which includes <isc/mem.h>, which includes
<isc/mutex.h>) after <cmocka.h> will not compile with musl libc as for
these programs, <sched.h> will be included after <cmocka.h>.
Always including <cmocka.h> after all other header files is not a
feasible solution as that causes the mock assertion macros defined in
<isc/util.h> to mangle the contents of <cmocka.h>, thus breaking
compilation. We cannot really use the __noreturn__ or analyzer_noreturn
attributes with cmocka assertion functions because they do return if the
tested condition is true. The problem is that what BIND unit tests do
is incompatible with Clang Static Analyzer's assumptions: since we use
cmocka, our custom assertion handlers are present in a shared library
(i.e. it is the cmocka library that checks the assertion condition, not
a macro in unit test code). Redefining cmocka's assertion macros in
<isc/util.h> is an ugly hack to overcome that problem - unfortunately,
this is the only way we can think of to make Clang Static Analyzer
properly process unit test code. Giving up on Clang Static Analyzer
being able to properly process unit test code is not a satisfactory
solution.
Undefining _GNU_SOURCE for unit test code could work around the problem
(musl libc's <sched.h> only defines the prototypes for calloc() and
free() when _GNU_SOURCE is defined), but doing that could introduce
discrepancies for unit tests including entire *.c files, so it is also
not a good solution.
All in all, including <sched.h> before <cmocka.h> for all affected unit
tests seems to be the most benign way of working around this musl libc
quirk. While quite an ugly solution, it achieves our goals here, which
are to keep the benefit of proper static analysis of unit test code and
to fix compilation against musl libc.
When the unit test is linked with dynamic libraries, the wrapping
doesn't occur, probably because it's different translation unit.
To workaround the issue, we provide thin wrappers with *real* symbol
names that just call the mocked functions.
Each individual test opened GeoIP databased but the database handles were never
closed. This commit moves the open/close from the individual unit tests into
the _setup and _teardown methods where they really belong.
Instead of the explicit struct initializer with all member, rely on the fact
that static variables are explicitly initialized to 0 if not explicitly
initialized.
