When performing QNAME minimization, named now sends an NS
query for the original QNAME, to prevent the parent zone from
receiving the QTYPE.
For example, when looking up example.com/A, we now send NS queries
for both com and example.com before sending the A query to the
servers for example.com. Previously, an A query for example.com
would have been sent to the servers for com.
Several system tests needed to be adjusted for the new query pattern:
- Some queries in the serve-stale test were sent to the wrong server.
- The synthfromdnssec test could fail due to timing issues; this
has been addressed by adding a 1-second delay.
- The cookie test could fail due to the a change in the count of
TSIG records received in the "check that missing COOKIE with a
valid TSIG signed response does not trigger TCP fallback" test case.
- The GL #4652 regression test case in the chain system test depends
on a particular query order, which no longer occurs when QNAME
minimization is active. We now disable qname-minimization
for that test.
Now that fctx_try is being called when adb returns DNS_ADB_NOMOREADDRESSES
we don't need these priming queries for the dual-stack-servers test
to succeed.
This re-do a previously existing EDE 22 system test as well as add
another one making sure the timed out flow detection works also on UDP
when the resolver is contacting the authoritative server. (the existing
test was using TCP to contact the authoritative servers).
Since the read timeout now works, the resolver time outs from the
dispatch level instead of from the "hung fetch" timer, and so the
EDE value in 'fctx_expired()' is not being set. Remove the expected
EDE value from the test.
Instead of running the whole resolver/ns4 server with -T noaa flag,
use it only for the part where it is actually needed. The -T noaa
could interfere with other parts of the test because the answers don't
have the authoritative-answer bit set, and we could have false
positives (or false negatives) in the test because the authoritative
server doesn't follow the DNS protocol for all the tests in the resolver
system test.
when the attach-cache option is used in the options block
with an arbitrary name, it causes all views to use the same
cache. however, previously, this could cause the cache to be
deleted and a new cache created every time the server was
reconfigured. this did *not* occur when attach-cache was
used at the view level to refer back to another view's cache.
in this commit we correct the problem by checking for
pre-existing caches during reconfiguration, and moving
them from the old server cache list to the new cache list
before cleaning up and freeing the old cache list.
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
the number of steps that can be followed in a CNAME chain
before terminating the lookup has been reduced from 16 to 11.
(this is a hard-coded value, but will be made configurable later.)
Variable assignment when calling subroutines might not be portable.
Notably, it doesn't work with FreeBSD shell, where the value of HOME
would be ignored in this case.
Since the commands are already executed in a subshell, export the HOME
variable to ensure it is properly handled in all shells.
This is a regresssion test for GL #4621 where the NODATA responses
are SOA records that match the QNAME rather than the zone name. In
particular for NS queries.
Stop the cname_and_other_data processing if we already know that the
result is true. Also, we know that CNAME will be placed in the priority
headers, so we can stop looking for CNAME if we haven't found CNAME and
we are past the priority headers.
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
'HOME=value command' should only change HOME for command but on
some platforms this occasionally sets HOME for the rest of the
test. Explicitly isolate the enviroment change using a sub shell.
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
Create a zone that triggers DNAME owner name checks in a zone that
is only reachable using a dual stack server. The answer contains
a name that is higher in the tree than the query name.
e.g.
foo.v4only.net. CNAME v4only.net.
v4only.net. A 10.0.0.1
ns4 is serving the test zone (ipv4-only)
ns6 is the root server for this test (dual stacked)
ns7 is acting as the dual stack server (dual stacked)
ns9 is the server under test (ipv6-only)
The test triggers a prefetch, but fails to check if it acutally
happened, which prevented it from catching a bug when the record's
TTL value matches the configured prefetch eligibility value.
Check that prefetch happened by comparing the TTL values.
Add a test ensuring that the amount of work fctx_getaddresses() performs
for any encountered delegation is limited: delegate example.net to a set
of 1,000 name servers in the redirect.com zone, the names of which all
resolve to IP addresses that nothing listens on, and query for a name in
the example.net domain, checking the number of times the findname()
function gets executed in the process; fail if that count is excessively
large.
Since the size of the referral response sent by ans3 is about 20 kB, it
cannot be sent back over UDP (EMSGSIZE) on some operating systems in
their default configuration (e.g. FreeBSD - see the
net.inet.udp.maxdgram sysctl). To enable reliable reproduction of
CVE-2022-2795 (retry patterns vary across BIND 9 versions) and avoid
false positives at the same time (thread scheduling - and therefore the
number of fetch context restarts - vary across operating systems and
across test runs), extend bin/tests/system/resolver/ans3/ans.pl so that
it also listens on TCP and make "ns1" in the "resolver" system test
always use TCP when communicating with "ans3".
Also add a test (foo.bar.sub.tld1/TXT) that ensures the new limitations
imposed on the resolution process by the mitigation for CVE-2022-2795 do
not prevent valid, glueless delegation chains from working properly.
the 'resolve' binary was added for testing dns_client as part of
the export library. the export libraries are no longer supported,
and tests using 'delv' provide the same coverage, so 'resolve' can
be removed now.
previously, when an iterative query returned FORMERR, resolution
would be stopped under the assumption that other servers for
the same domain would likely have the same capabilities. this
assumption is not correct; some domains have been reported for
which some but not all servers will return FORMERR to a given
query; retrying allows recursion to succeed.
a test case in the 'resolver' system test was reliant on
logged output that would only be present when query tracing
was enabled, as in developer builds. that test case is now
disabled when query tracing is not available. Thanks to
Anton Castelli.
1. 10 seconds is an unfortunate pick because that reintroduces the
problem described in commit 5307bf64 (for an earlier check).
Change the +tries=3 +timeout=10 to +tries=2 +time=15, so that we
minimize the risk of dig missing any responses sent by the server in
the first 15 seconds while also increasing our chances of the
response arriving in time on machines under heavy load and allowing
it a single retry in case things go awry.
2. The comment about TCP above was misleading: as painfully proven by
GitLab CI, using TCP is no guarantee of receiving a response in a
timely manner. It may help a bit, but it is certainly not a 100%
reliable solution.
Change the dig invocation to just use UDP like in the two prior
tests for consistency (and revise that comment accordingly).
The resolver system tests was exhibiting often intermitten failures,
increase the timeout from default 5 second to 10 seconds to give the dig
more leeway for providing an answer.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
the resolver test checks that the correct number of fetches have
been sent NS rrsets of a given size, but it formerly did so by
counting queries received by the authoritative server, which could
result in an off-by-one count if one of the queries had been resent
due to a timeout or a port number collision.
this commit changes the test to count fetches initiated by the
resolver, which should prevent the intermittent test failure, and
is the actual datum we were interested in anyway.
Add a lame delegation to lame.example.org with only an A record
in the additional section; on failure, this will trigger a retry
with AAAA, which will loop. Test that dig returns SERVFAIL, in
addition to confirming that named doesn't hang on shutdown.
The additional processing method has been expanded to take the
owner name of the record, as HTTPS and SVBC need it to process "."
in service form.
The additional section callback can now return the RRset that was
added. We use this when adding CNAMEs. Previously, the recursion
would stop if it detected that a record you added already exists. With
CNAMEs this rule doesn't work, as you ultimately care about the RRset
at the target of the CNAME and not the presence of the CNAME itself.
Returning the record allows the caller to restart with the target
name. As CNAMEs can form loops, loop protection was added.
As HTTPS and SVBC can produce infinite chains, we prevent this by
tracking recursion depth and stopping if we go too deep.
The ISC_MEM_DEBUGSIZE and ISC_MEM_DEBUGCTX did sanity checks on matching
size and memory context on the memory returned to the allocator. Those
will no longer needed when most of the allocator will be replaced with
jemalloc.
one of the tests in the resolver system test depends on dig
getting no response to its first two query attempts, and SERVFAIL
on the third after resolution times out.
using a 5-second retry timer in dig means the SERVFAIL response
could occur while dig is discarding the second query and preparing
to send the third. in this case the server's response could be
missed. shortening the retry interval to 4 seconds ensures that
dig has already sent the third query when the SERVFAIL response
arrives.
also, the serve-stale system test could fail due to a race in which
it timed out after waiting ten seconds for a file to be written, and
the dig timeout was just a bit longer. this is addressed by extending
the dig timeout to 11 seconds for this test.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
Add a system test that counts how many address fetches are made
for different numbers of NS records and checks that the number
are successfully limited.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
