sd_notify() may be called by a service to notify the service manager
about state changes. It can be used to send arbitrary information,
encoded in an environment-block-like string. Most importantly, it can be
used for start-up completion notification.
Add libsystemd check to autoconf script and when the library is detected
add calls to sd_notify() around the server->reload_status changes.
Co-authored-by: Petr Špaček <pspacek@isc.org>
If there was a collision of key id across algorithms it was not
possible to determine where counter applies to which algorithm for
xml statistics while for json only one of the values was emitted.
The key names are now "<algorithm-number>+<id>" (e.g. "8+54274").
the 'resolve' binary was added for testing dns_client as part of
the export library. the export libraries are no longer supported,
and tests using 'delv' provide the same coverage, so 'resolve' can
be removed now.
dns_request_create() was a front-end to dns_request_createvia() that
was only used by test binaries. dns_request_createvia() has been
renamed to dns_request_create(), and the test programs that formerly
used dns_request_create() have been updated to use the new parameters.
The test expected `xn--ah-` to be treated as a syntax error (punycode
requires letters after the last hyphen) but libidn2 on buster
converted the label to `ah` instead. To avoid this bug, change the
invalid label to `xn--0000h` which translates to an out-of-range
unicode codepoint (beyond the maximum value) which is corectly
trated as invalid in older libidn2.
The change to `testsock.pl` in commit 258a896a broke the system
tests in out-of-tree builds because `ifconfig.sh.in` is not
copied to the worktree. Use `ifconfig.sh` instead.
In rndc_recvdone(), if 'sends' was not 0, then 'recvs' was not
decremented, in which case isc_loopmgr_shutdown() was never reached,
which could cause a hang. (This has not been observed to happen, but
the code was incorrect on examination.)
Reduce the number of places that know about the number of IP addresses
required by the system tests, by changing `testsock.pl` to read the
`max` from `ifconfig.sh.in`. This should make the test runner fail
early with a clear message when the interfaces have been set up by an
obsolete script.
Add comments to cross-reference `ifconfig.sh.in`, `testsock.pl`, and
`org.isc.bind.system` to make it easier to remember what needs
updating when an IP address is added.
If there are any problems with IDN processing, DiG will now quietly
handle the name as if IDN were disabled. This means that international
query names are rendered verbatim on the wire, and ACE names are
printed raw without conversion to UTF8.
If you want to check the syntax of international domain names,
use the `idn2` utility.
There was a ubsan error reporting an invalid value for interface_auto
(a boolean value cannot be 190) because it was not initialized. To
avoid this problem happening again, ensure the whole of the server
structure is initialized to zero before setting the (relatively few)
non-zero elements.
It is possible to bypass Response Rate Limiting (RRL)
`responses-per-second` limitation using specially crafted wildcard
names, because the current implementation, when encountering a found
DNS name generated from a wildcard record, just strips the leftmost
label of the name before making a key for the bucket.
While that technique helps with limiting random requests like
<random>.example.com (because all those requests will be accounted
as belonging to a bucket constructed from "example.com" name), it does
not help with random names like subdomain.<random>.example.com.
The best solution would have been to strip not just the leftmost
label, but as many labels as necessary until reaching the suffix part
of the wildcard record from which the found name is generated, however,
we do not have that information readily available in the context of RRL
processing code.
Fix the issue by interpreting all valid wildcard domain names as
the zone's origin name concatenated to the "*" name, so they all will
be put into the same bucket.
The zone 'retransfer3.' tests whether zones that 'rndc signing
-nsec3param' requests are queued even if the zone is not loaded.
The test assumes that if 'rndc signing -list' shows that the zone is
done signing with two keys, and there are no NSEC3 chains pending, the
zone is done handling the '-nsec3param' queued requests. However, it
is possible that the 'rndc signing -list' command is received before
the corresponding privatetype records are added to the zone (the records
that are used to retrieve the signing status with 'rndc signing').
This is what happens in test failure
https://gitlab.isc.org/isc-projects/bind9/-/jobs/2722752.
The 'rndc signing -list retransfer3' is thus an unreliable check.
It is simpler to just remove the check and wait for a certain amount
of time and check whether ns3 has re-signed the zone using NSEC3.
The usage of xmlInitThreads() and xmlCleanupThreads() functions in
libxml2 is now marked as deprecated, and these functions will be made
private in the future.
Use xmlInitParser() and xmlCleanupParser() instead of them.
In several cases where IDNA2008 mappings do not exist whereas IDNA2003
mappings do, dig was failing to process the suplied domain name. Take a
backwards compatible approach, and convert the domain to IDNA2008 form,
and if that fails try the IDNA2003 conversion.
There is an omission of assigning the return value coming from the
isc_portset_create() function to the result variable.
CID 356328:
/bin/named/server.c: 8756 in load_configuration()
8750 "creating UDP/IPv4 port set: %s",
8751 isc_result_totext(result));
8752 goto cleanup_bindkeys_parser;
8753 }
8754 isc_portset_create(named_g_mctx, &v6portset);
8755 if (result != ISC_R_SUCCESS) {
>>> CID 356328: Control flow issues (DEADCODE)
>>> Execution cannot reach this statement: "isc_log_write(named_g_lctx,...".
8756 isc_log_write(named_g_lctx, NAMED_LOGCATEGORY_GENERAL,
8757 NAMED_LOGMODULE_SERVER, ISC_LOG_ERROR,
8758 "creating UDP/IPv6 port set: %s",
8759 isc_result_totext(result));
8760 goto cleanup_v4portset;
8761 }
YAML strings should be quoted if they contain colon characters.
Since IPv6 addresses do, we now quote the query_address and
response_address strings in all YAML output.
Check the new configuration option's syntax using the 'checkconf' system
test.
Check if the new option works by parsing DiG's output in the 'rpz'
system test.
Implement the configuration option with its checking and parsing parts.
The option should be later used by BIND to set an extended error
code (EDE) for the queries modified in the result of RPZ processing.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
* isc_timer was rewritten using the uv_timer, and isc_timermgr_t was
completely removed; isc_timer objects are now directly created on the
isc_loop event loops.
* the isc_timer API has been simplified. the "inactive" timer type has
been removed; timers are now stopped by calling isc_timer_stop()
instead of resetting to inactive.
* isc_manager now creates a loop manager rather than a timer manager.
* modules and applications using isc_timer have been updated to use the
new API.
The wait_for_zone_is_signed function was never called, which could lead
to test failures due to timing issues (where a zone was not fully signed
yet, but the test was trying to verify the zone).
Also add two missing set_nsec3param calls to ensure the ITERATIONS
value is set for these test cases.
Add two scenarios where we change the dnssec-policy from using RSASHA1
to something with NSEC3.
The first case should work, as the DS is still in hidden state and we
can basically do anything with DNSSEC.
The second case should fail, because the DS of the predecessor is
published and we can't immediately remove the predecessor DNSKEY. So
in this case we should keep the NSEC chain for a bit longer.
Add two more scenarios where we change the dnssec-policy from using
NSEC3 to something NSEC only. Both should work because there are no
restrictions on using NSEC when it comes to algorithms, but in the
cases where the DS is published we can't bluntly remove the predecessor.
Extend the nsec3 system test by also checking the DNSKEY RRset for the
expected DNSKEY records. This requires some "kasp system"-style setup
for each test (setting key properties and key states). Also move the
dnssec-verify check inside the check_nsec/check_nsec3 functions because
we will have to do that every time.
When doing a dnssec-policy reconfiguration from a zone with NSEC only
keys to a zone that uses NSEC3, figure out to wait with building the
NSEC3 chain.
Previously, BIND 9 would attempt to sign such a zone, but failed to
do so because the NSEC3 chain conflicted with existing DNSKEY records
in the zone that were not compatible with NSEC3.
There exists logic for detecting such a case in the functions
dnskey_sane() (in lib/dns/zone.c) and check_dnssec() (in
lib/ns/update.c). Both functions look very similar so refactor them
to use the same code and call the new function (called
dns_zone_check_dnskey_nsec3()).
Also update the dns_nsec_nseconly() function to take an additional
parameter 'diff' that, if provided, will be checked whether an
offending NSEC only DNSKEY will be deleted from the zone. If so,
this key will not be considered when checking the zone for NSEC only
DNSKEYs. This is needed to allow a transition from an NSEC zone with
NSEC only DNSKEYs to an NSEC3 zone.
Before the commit some checks in the system test would try to verify
that different HTTP methods can be used and are functional. However,
until recently, it was not possible to tell from the output which
method was in fact used, so it turned out that +http-plain-get option
is broken.
This commit add the additional checks to prevent that from happening
in the future.
Moves tests from being RSASHA1 based to RSASHA256 based where possible
and split out the remaining RSASHA1 based tests so that they are not
run on OS's that don't support RSASHA1.
migrate-nomatch-alglen: switched to RSASHA256 instead of RSASHA1
and the key size now changes from 2048 bits to 3072 bits instead
of 1024 bits to 2048 bits.
migrate-nomatch-algnum: switched to RSASHA256 instead of RSASHA1
as initial algorithm and adjusted mininum key size to 2048 bits.
rsasha256: adjusted minimum key size to 2048 bits.
The nsec-only.example zone was not converted as we use it to
test nsec-only DNSSEC algorithms to nsec3 conversion failure.
The subtest is skipped in fips mode.
Update "checking revoked key with duplicate key ID" test
to use FIPS compatible algorithm.
Clean up dns_rdatalist_tordataset() and dns_rdatalist_fromrdataset()
functions by making them return void, because they cannot fail.
Clean up other functions that subsequently cannot fail.
