The malloced and maxmalloced memory counters were mostly useless since
we removed the internal allocator blocks - it would only differ from
inuse by the memory context size itself.
It is better to use consistent file names to avoid issue with sorting
etc.
Using underscore in filenames as opposed to dash was chosen because it
seems more common in pytest/python to use underscore for filenames.
Also rename the bin/tests/system/timeouts/tests-tcp.py file to
bin/tests/system/timeouts/tests_tcp_timeouts.py to avoid pytest name
collision (there can't be two files named tests_tcp.py).
Avoid using the environment variables for feature detection and use the
feature-test utility instead.
Remove the obsolete environment variables from conf.sh, since they're no
longer used anywhere.
Previously, there were two different ways to detect feature support.
Either through an environment variable set by configure in conf.sh, or
using the feature-test utility.
It is more simple and consistent to have only one way of detecting the
feature support. Using the feature-test utility seems superior the the
environment variables set by configure.
For tests where the TCP connection might get interrupted abruptly,
replace the nc with curl as the data sent from server to client might
get lost because of abrupt TCP connection. This happens when the TCP
connection gets closed during sending the large request to the server.
As we already require curl for other system tests, replace the nc usage
in the statschannel test with curl that actually understands the
HTTP/1.1 protocol, so the same connection is reused for sending the
consequtive requests, but without client-side "pipelining".
For the record, the server doesn't support parallel processing of the
pipelined request, so it's a bit misnomer here, because what we are
actually testing is that we process all requests received in a single
TCP read callback.
The 5 seconds requirement to finish the 'pipelined with truncated
stream' was causing spurious failures in the CI because the job runners
might be very busy and sending 128k of data might simply take some time.
Remove the time requirement altogether, there's actually no reason why
the test SHOULD or even MUST finish under 5 seconds.
add a test to compare the Content-Length of successive compressed
messages on a single HTTP connection that should contain the same
data; fail if the size grows by more than 100 bytes from one query
to the next.
Now that the artificial limit on the recv buffer has been removed, the
current system test always fails because it tests if the truncation has
happened.
Add test that sending more than 10 headers makes the connection to
closed; and add test that sending huge HTTP request makes the connection
to be closed.
If there was a collision of key id across algorithms it was not
possible to determine where counter applies to which algorithm for
xml statistics while for json only one of the values was emitted.
The key names are now "<algorithm-number>+<id>" (e.g. "8+54274").
The intended purpose of the @pytest.mark.requests decorator was to cause
Python-based parts of the "statschannel" system test to be skipped if
the requests Python module is not available. However, both
tests-json.py and tests-xml.py contain a global "import requests"
statement which triggers ImportError exceptions during test
initialization if the requests module is not available. In other words,
the @pytest.mark.requests decorator serves no useful purpose.
Since all tests in both tests-json.py and tests-xml.py depend on the
requests Python module, employ pytest.importorskip() to ensure the
Python-based parts of the "statschannel" system test are skipped when
the requests module is not available. Remove all occurrences of the
@pytest.mark.requests decorator (and all associated code) to prevent
confusion.
All tests in bin/tests/system/statschannel/tests-xml.py require libxml2
support to be enabled in BIND 9 at build-time. Instead of applying the
same pytest.mark.skipif() decorator to every test in that file, set the
'pytestmark' global accordingly in order to immediately skip all tests
in tests-xml.py if libxml2 support is not compiled in.
Remove all occurrences of the @pytest.mark.xml decorator (and all
associated code) from the "statschannel" system test as the
xml.etree.ElementTree module is a part of the Python standard library
since Python 2.5 (so checking whether it is available is redundant) and
checking for libxml2 support in the tested BIND 9 build is already
handled by setting the 'pytestmark' global accordingly.
All tests in bin/tests/system/statschannel/tests-json.py require json-c
support to be enabled in BIND 9 at build-time. Instead of applying the
same pytest.mark.skipif() decorator to every test in that file, set the
'pytestmark' global accordingly in order to immediately skip all tests
in tests-json.py if json-c support is not compiled in.
Remove all occurrences of the @pytest.mark.json decorator (and all
associated code) from the "statschannel" system test as the json module
is a part of the Python standard library since Python 2.6 (so checking
whether it is available is redundant) and checking for json-c support in
the tested BIND 9 build is already handled by setting the 'pytestmark'
global accordingly.
Also remove a related excerpt from bin/tests/system/rpzextra/conftest.py
as it is a copy-paste artifact that serves no purpose in the "rpzextra"
system test.
The "statschannel" system test contains two Python helper modules:
- generic.py: test functions directly invoked by both tests-json.py
and test-xml.py,
- helper.py: helper functions invoked by test functions in generic.py.
The above logic for splitting helper functions into Python modules
prevents selective test skipping from working due to unconditional
import statements being present in both helper modules. For example, if
dnspython is not available on the test host, tests-json.py imports
generic.py, which in turn imports helper.py, which in turn attempts to
import various dnspython modules, triggering ImportError exceptions
during test initialization. Various decorators used for some tests
(like @pytest.mark.dnspython) suggest that such a scenario should be
handled gracefully, but that is not the case - modifying the test
collection in conftest.py does not prevent pytest from failing due to
import errors.
Fix by moving helper functions around to achieve a different split:
- generic.py: helper functions only relying on the Python standard
library,
- generic_dnspython.py: helper functions requiring dnspython.
Only two tests in tests-{json,xml}.py need dnspython to work
(test_traffic_json(), test_traffic_xml()). Since all
dnspython-dependent code is now present in generic_dnspython.py, employ
pytest.importorskip() in those two tests to ensure they can be
selectively skipped when dnspython is not available. Adjust other code
to account for the revised Python helper module layout. Remove all
occurrences of the @pytest.mark.dnspython decorator (and all associated
code) from the "statschannel" system test to prevent confusion.
Most Python-based system tests need to know which ports were assigned to
a given test by bin/tests/system/get_ports.sh. This is currently
handled by inspecting the values of various environment variables (set
by bin/tests/system/run.sh) and passing the port numbers to Python
scripts via pytest fixtures. However, this glue code has so far been
copy-pasted into each system test using it, rather than reused.
Since pytest also looks for conftest.py files in parent directories,
move commonly used fixtures to bin/tests/system/conftest.py. Set the
scope of all the moved fixtures to "session" as their return values are
only based on environment variables, so there is no point in recreating
them for every test requesting them. Adjust test code accordingly.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Check to see whether there are outstanding requests in the
httpd receive buffer after sending the response, and if so,
process them.
Test that pipelined requests are handled by sending multiple
minimal HTTP/1.1 using netcat (nc) and checking that we get
back the same number of responses.
pytest was failing because it was testing features that had
not been configured. test to see if those features have been
configured before running the tests.
Add a statschannel test case to confirm that when keys are removed
(in this case because of a dnssec-policy change), the corresponding
dnssec-sign stats are cleared and are no longer shown in the
statistics.
Add a test case that has more than four keys (the initial number of
key slots that are created for dnssec-sign statistics). We shouldn't
be expecting weird values.
This fixes some errors in the manykeys zone configuration (keys
were created for algorithm RSASHA256, but the policy expected RSASHA1,
and the zone was not allowing dynamic updates).
This also fixes an error in the calls to 'zones-json.pl': The perl
script excepts an index number where the zone can be found, rather
than the zone name.
The pytest "cacheprovider" plugin produces a .cache/v/cache/lastfailed
file, which holds a Python dictionary structure with failed tests.
However, on Ubuntu 16.04 (Xenial) the file is created even though the
test passed and the file contains just an empty dictionary ("{}").
Given that we are not interested in this feature, disabling the
"cacheprovider" plugin globally and removing per-test removals of the
.cache directory seems like the best course of action.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
Use str.format() instead of f-strings in Python system tests to enable
them to work on Python 3 versions older than 3.6 as the latter is not
available on some operating systems used in GitLab CI that are still
actively supported (CentOS 6, Debian 9, Ubuntu 16.04).
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
Add a statschannel test case for DNSSEC sign metrics that has more
keys than there are allocated stats counters for. This will produce
gibberish, but at least it should not crash.
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
The SYSTEMTESTTOP variable is set by bin/tests/system/run.sh. When
system tests are run on Windows, that variable will contain an absolute
Cygwin path. In the case of the "statschannel" system test, using the
unmodified SYSTEMTESTTOP variable in tests.sh causes the RNDCCMD
variable to contain an invocation of a native Windows application with
an absolute Cygwin path passed as a parameter, which prevents rndc from
working in that system test. Until we have a cleaner solution, override
SYSTEMTESTTOP with a relative path to work around the issue and thus fix
the "statschannel" system test on Windows.
When trying to extract the key ID from a key file name, some test code
incorrectly attempts to strip all leading zeros. This breaks tests when
keys with ID 0 are generated. Add a new helper shell function,
keyfile_to_key_id(), which properly handles keys with ID 0 and use it in
test code whenever a key ID needs to be extracted from a key file name.
In addition to gather how many times signatures are created per
key in a zone, also count how many of those signature creations are
because of DNSSEC maintenance. These maintenance counters are
incremented if a signature is refreshed (but the RRset did not
changed), when the DNSKEY RRset is changed, and when that leads
to additional RRset / RRSIG updates (for example SOA, NSEC).
This adds tests to the statschannel system test for testing if
the dnskey sign operation counters are incremented correctly.
It tests three cases:
1. A zone maintenance event where all the signatures that are about
to expire are resigned.
2. A dynamic update event where the new RR and other relevant records
(SOA, NSEC) are resigned.
3. Adding a standby key, that means the DNSKEY and SOA RRset are
resigned.
