the nsupdate system test was intermittently failing due to the update
quota not being exceeded when it should have been. this is most likely
a timing issue: the client is sending updates too slowly, or the server
is processing them too quickly, for the quota to fill. this commit
attempts to make that the failure less likely by increasing the number
of update transactions from 10 to 20.
Following deleting the root trust anchor and reconfiguring the
server it takes some time to for trust anchor to appear in 'rndc
managed-keys status' output. Retry several times.
check in the log files of receiving servers that the originating
ports for notify and SOA query messages were set correctly from
configured notify-source and transfer-source options.
* rbt node chains were sized to allow for bitstring labels, so they
had 256 levels; but in the absence of bistrings, 128 is enough.
* dns_byaddr_createptrname() had a redundant options argument,
and a very outdated doc comment.
* A number of comments referred to bitstring labels in a way that is
no longer helpful. (A few informative comments remain.)
Set the DS state after issuing 'rndc dnssec -checkds'. If the DS
was published, it should go in RUMOURED state, regardless whether it
is already safe to do so according to the state machine.
Leaving it in HIDDEN (or if it was magically already in OMNIPRESENT or
UNRETENTIVE) would allow for easy shoot in the foot situations.
Similar, if the DS was withdrawn, the state should be set to
UNRETENTIVE. Leaving it in OMNIPRESENT (or RUMOURED/HIDDEN)
would also allow for easy shoot in the foot situations.
The malloced and maxmalloced memory counters were mostly useless since
we removed the internal allocator blocks - it would only differ from
inuse by the memory context size itself.
The validity default days value of 1 was used for debugging and
left as such accidentally.
Use 10950 days, as used elsewhere (for example, in doth test CA).
This does not affect anything, the value will be effective when
generating new test certificates in the future.
Change the 'forward' system test to enable DoT on ns2 server,
and test that forwarding from ns4 to the DoT-enabled ns2 works.
In order to test different scenarios, create a test CA (based on
similar CAs for 'doth' and 'nsupdate' system tests), and test
both insecure (no certificate validation) and secure (also with
mutual TLS) TLS configurations, as well as a configuration with an
expired certificate.
A 'tls' statement can be specified both for individual addresses
and for the whole list (as a default value when an individual
address doesn't have its own 'tls' set), just as it was done
before for the 'port' value.
Create a new function 'print_rawqstring()' to print a string residing
in a 'isc_textregion_t' type parameter.
Create a new function 'copy_string()' to copy a string from a
'cfg_obj_t' object into a 'isc_textregion_t'.
Add a test case for a server that uses a resolver as an parental-agent.
We need two root servers, ns1 and ns10, one that delegates to the
'checkds' tld with the DS published (ns2), and one that delegates to
the 'checkds' tld with the DS removed (ns5). Both root zones are
being setup in the 'ns1/setup.sh' script.
We also need two resolvers, ns3 and ns8, that use different root hints
(one uses ns1 address as a hint, the other uses ns10).
Then add the checks to test_checkds.py is similar to the existing tests.
Update 'types' because for zones that have the DS withdrawn (or to be
withdrawn), the CDS and CDNSKEY records should not be published and
thus should not be in the NSEC bitmap.
Add 'port' token to deprecated.conf. Also add options
'use-v4-udp-ports', 'use-v6-udp-ports', 'avoid-v4-udp-ports',
and 'avoid-v6-udp-ports'.
All of these should trigger warnings (except when deprecation warnings
are being ignored).
Deprecate the use of "port" when configuring query-source(-v6),
transfer-source(-v6), notify-source(-v6), parental-source(-v6),
etc. Also deprecate use-{v4,v6}-udp-ports and avoid-{v4,v6}udp-ports.
The condition was accidentally reversed during refactoring in
9730ac4c56 . It would result in skipped
tests on builds with proper support and false negatives on builds
without proper feature support.
Credit for reporting the issue and the fix goes to Stanislav Levin.
Instead of using the current working directory to find the ifconfig.sh
script, look for the ifconfig.sh.in template in the directory where the
testsock.pl script is located. This enables the testsock.pl script to be
called from any working directory.
Using the ifconfig.sh.in template is sufficient, since it contains
the necessary information to be extracted: the max= value (which is
hard-coded in the template).
Move the core dump detection functionality for system test runs into a
separate script. This enables reuse by the pytest runner. The
functionality remains the same.
Avoid creating any temporary files in the current workdir.
Additional/changing files in the bin/tests/system directory are
problematic for pytest/xdist collection phase, which assumes the list of
files doesn't change between the collection phase of the main pytest
thread and the subsequent collection phase of the xdist worker threads.
Since the testcrypto.sh is also called during pytest initialization
through conf.sh.common (to detect feature support), this could
occasionally cause a race condition when the list of files would be
different for the main pytest thread and the xdist worker.
verify that updates are refused when the client is disallowed by
allow-query, and update forwarding is refused when the client is
is disallowed by update-forwarding.
verify that "too many DNS UPDATEs" appears in the log file when too
many simultaneous updates are processing.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Prime the cache with the following records:
shortttl.cname.example. 1 IN CNAME longttl.target.example.
longttl.target.example. 600 IN A 10.53.0.2
Wait for the CNAME record to expire, disable the authoritative server,
and query 'shortttl.cname.example' again, expecting a stale answer.
This bug was masked in the tests because the `catz` test script did an
`rndc addzone` before an `rndc delzone`. The `addzone` autovivified
the NZF config, so `delzone` worked OK.
This commit swaps the order of two sections of the `catz` test script
so that it uses `delzone` before `addzone`, which provokes a crash
when `delzone` requires a non-NULL NZF config.
To fix the crash, we now try to remove the zone from the NZF config
only if it was dynamically added but not by a catalog zone.
Remove parsing the configuration options 'alt-transfer-source',
'alt-transfer-source-v6', and 'use-alt-transfer-source', and remove
the corresponding code that implements the feature.
Use the configured 'source' and 'source-v6' when initiating a zone
transfer, sending a notify, or when checking for the DS. Remove the
special code for using alternate transfer sources.
Update some system tests to use the new configuration and make sure
the tests still work.
Add a new way to configure the preferred source address when talking to
remote servers such as primaries and parental-agents. This will
eventually deprecate options such as 'parental-source',
'parental-source-v6', 'transfer-source', etc.
Example of the new configuration:
parental-agents "parents" port 5353 \
source 10.10.10.10 port 5354 dscp 54 \
source-v6 2001:db8::10 port 5355 dscp 55 {
10.10.10.11;
2001:db8::11;
};
The pre-defined test cases use named.$TESTCASE.conf naming convention,
where TESTCASE is a human readable name contaning actual word(s). The
autogenerated test cases' names always start with a number from 1 to 6.
bin/tests/system/rrsetorder/dig.out* files match a gitignore expression
present in bin/tests/system/.gitignore. Since these are meant to be
reference files that are compared to the files generated when the
"rrsetorder" system test is run, rename them to avoid listing tracked
files in .gitignore files.
The test expects a "connection timed out" message from DiG when it
experiences a timeout, while the current version of DiG prints just
a "timed out" message, like below:
;; communications error to 10.53.0.1#11314: timed out
;; communications error to 10.53.0.1#11314: timed out
;; communications error to 10.53.0.1#11314: timed out
; <<>> DiG 9.19.9-dev <<>> -p 11314 +tries +time +tcp +tries +time @10.53.0.1 dropedns. TXT
; (1 server found)
;; global options: +cmd
;; no servers could be reached
Change the expected string to match the current DiG output.
Use the '-F' switch for "grep" for matching a fixed string.
In order to have a common naming convention for system tests, rename the
only outlier "engine_pkcs11" to "enginepkcs11", which was the only
system test using an underscore in its name.
The only allowed word separators for system test names are either dash
or no separator.
It is better to use consistent file names to avoid issue with sorting
etc.
Using underscore in filenames as opposed to dash was chosen because it
seems more common in pytest/python to use underscore for filenames.
Also rename the bin/tests/system/timeouts/tests-tcp.py file to
bin/tests/system/timeouts/tests_tcp_timeouts.py to avoid pytest name
collision (there can't be two files named tests_tcp.py).
This introduces a Python dependency for running system tests. It is
needed in order to:
- write new test control scripts in Python
- gradually rewrite old Perl scripts into Python if needed
- eventually introduce pytest as the new test runner framework
This commit is not intended to be backported to 9.16.
Nothing from conf.sh.common is required to set these values. On the
contrary, a Python interpreter needs to be set in order to randomize the
algorithm set (which happens in conf.sh.common).
When testcrypto.sh is used as a standalone script, always use quiet mode
to avoid using undefined commands (such as echo_i) which require
inclusion of the entire conf.sh machinery.
This commit modifies the existing unit tests for TLS DNS and TCP DNS
in such a way that the new Stream DNS transport is used as it is
intended to be a drop-in replacement for these two transports.
The isc_buffer_reserve() would be passed a reference to the buffer
pointer, which was unnecessary as the pointer would never be changed
in the current implementation. Remove the extra dereference.
The dispatches are not thread-bound, and used freely between various
threads (see the dns_resolver and dns_request units for details).
This refactoring make sure that all non-const dns_dispatch_t and
dns_dispentry_t members are accessed under a lock, and both object now
track their internal state (NONE, CONNECTING, CONNECTED, CANCELED)
instead of guessing the state from the state of various struct members.
During the refactoring, the artificial limit DNS_DISPATCH_SOCKSQUOTA on
UDP sockets per dispatch was removed as the limiting needs to happen and
happens on in dns_resolver and limiting the number of UDP sockets
artificially in dispatch could lead to unpredictable behaviour in case
one dispatch has the limit exhausted by others are idle.
The TCP artificial limit of DNS_DISPATCH_MAXREQUESTS makes even less
sense as the TCP connections are only reused in the dns_request API
that's not a heavy user of the outgoing connections.
As a side note, the fact that UDP and TCP dispatch pretends to be same
thing, but in fact the connected UDP is handled from dns_dispentry_t and
dns_dispatch_t acts as a broker, but connected TCP is handled from
dns_dispatch_t and dns_dispatchmgr_t acts as a broker doesn't really
help the clarity of this unit.
This refactoring kept to API almost same - only dns_dispatch_cancel()
and dns_dispatch_done() were merged into dns_dispatch_done() as we need
to cancel active netmgr handles in any case to not leave dangling
connections around. The functions handling UDP and TCP have been mostly
split to their matching counterparts and the dns_dispatch_<function>
functions are now thing wrappers that call <udp|tcp>_dispatch_<function>
based on the socket type.
More debugging-level logging was added to the unit to accomodate for
this fact.
When the resolver was refactored, the statistics system test had to be
adjusted in c6b4d82557. Unfortunately,
this change had to be done because of an error in the resolver
refactoring where timeout would not retry next server, but keep trying
the same server. As we have now fixed this bug, revert the change to
the test back to the previous state.
