If the dnskey-ttl in the dnssec-policy doesn't match the DNSKEY's
ttl then the DNSKEY, CDNSKEY and CDS rrset should be updated by
named to reflect the expressed policy. Check that named does this
by creating a zone with a TTL that does not match the policy's TTL
and check that it is correctly updated.
All changes in this commit were automated using the command:
shfmt -w -i 2 -ci -bn . $(find . -name "*.sh.in")
By default, only *.sh and files without extension are checked, so
*.sh.in files have to be added additionally. (See mvdan/sh#944)
The 'dynamic-signed-inline-signing.kasp' zone was set up with
the environment variable 'ksktimes', but that should be 'csktimes'
which is set one line above. Since the values are currently the same
the behavior is identical, but of course it should use the correct
variable.
The 'step4.enable-dnssec.autosign' zone was set up twice. This is
unnecessary.
Add a test scenario for a dynamic zone that uses inline-signing which
accidentally has signed the raw version of the zone.
This should not trigger resign scheduling on the raw version of the
zone.
The old name "common" clashes with the convention of system test
directory naming. It appears as a system test directory, but it only
contains helper files.
To reduce confusion and to allow automatic detection of issues with
possibly missing test files, rename the helper directory to "_common".
The leading underscore indicates the directory is different and the its
name can no longer be confused with regular system test directories.
When using automated DNSSEC management, it is required that the zone
is dynamic, or that inline-signing is enabled (or both). Update the
checkconf code to also allow inline-signing to be enabled within
dnssec-policy.
Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
These two configuration options worked in conjunction with 'auto-dnssec'
to determine KSK usage, and thus are now obsoleted.
However, in the code we keep KSK processing so that when a zone is
reconfigured from using 'dnssec-policy' immediately to 'none' (without
going through 'insecure'), the zone is not immediately made bogus.
Add one more test case for going straight to none, now with a dynamic
zone (no inline-signing).
Ensure all shell system tests are executed with the errexit option set.
This prevents unchecked return codes from commands in the test from
interfering with the tests, since any failures need to be handled
explicitly.
Add this test scenario for a bug fixed a while ago. When a third key is
introduced while the previous rollover hasn't finished yet, the keymgr
could decide to remove the first two keys, because it was not checking
for an indirect dependency on the keys.
In other words, the previous bug behavior was that the first two keys
were removed from the zone too soon.
This test case checks that all three keys stay in the zone, and no keys
are removed premature after another new key has been introduced.
the default value of dnssec-validation is 'auto', which causes
a server to send a key refresh query to the root zone when starting
up. this is undesirable behavior in system tests, so this commit
sets dnssec-validation to either 'yes' or 'no' in all tests where
it had not previously been set.
this change had the mostly-harmless side effect of changing the cached
trust level of unvalidated answer data from 'answer' to 'authanswer',
which caused a few test cases in which dumped cache data was examined in
the serve-stale system test to fail. those test cases have now been
updated to expect 'authanswer'.
The log message is supposed to contain the zone name which was
erroneously omitted, but didn't pop up during tests, since return code
was silently ignored.
Now it actually waits for the proper log message rather than being an
equivalent of 3 second sleep (which was also sufficient to make the test
pass, thus we detected no failure).
In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
Change the commandline option -G to take a string that determines what
sync records should be published. It is a comma-separated string with
each element being either "cdnskey", or "cds:<algorithm>", where
<algorithm> is a valid digest type. Duplicates are suppressed.
Change one of the test cases to use a different digest type (4). The
system tests and kasp script need to be updated to take into account
the new algorithm (instead of the hard coded 2).
Set the DS state after issuing 'rndc dnssec -checkds'. If the DS
was published, it should go in RUMOURED state, regardless whether it
is already safe to do so according to the state machine.
Leaving it in HIDDEN (or if it was magically already in OMNIPRESENT or
UNRETENTIVE) would allow for easy shoot in the foot situations.
Similar, if the DS was withdrawn, the state should be set to
UNRETENTIVE. Leaving it in OMNIPRESENT (or RUMOURED/HIDDEN)
would also allow for easy shoot in the foot situations.
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
"next_key_event_threshold" is assigned with
"next_key_event_threshold+i", but "i" is empty (never set, nor used
afterwards).
posh, the Policy-compliant Ordinary SHell, failed on this assignment
with:
tests.sh:253: : unexpected `end of expression'
The changes in the code have the side effect that the CDNSKEY and CDS
records in the secure version of the zone are not reusable and thus
are thrashed from the zone. Remove the apex checks for this use case.
We only care about that the zone is not immediately goes bogus, but
a user really should use the built-in "insecure" policy when unsigning
a zone.
We no longer accept copying DNSSEC records from the raw zone to
the secure zone, so update the kasp system test that relies on this
accordingly.
Also add more debugging and store the dnssec-verify results in a file.
Add a kasp system test that reconfigures a dnssec-policy zone from
maintaining DNSSEC records directly to the zone to using inline-signing.
Add a similar test case to the nsec3 system test, testing the same
thing but now with NSEC3 in use.
Moves tests from being RSASHA1 based to RSASHA256 based where possible
and split out the remaining RSASHA1 based tests so that they are not
run on OS's that don't support RSASHA1.
Fix a comment, ensuring the right parameters are used (zone is
parameter $3, not $2) and add view and policy parameters to the comment.
Fix the view tests and test the correct view (example3 instead of
example2).
Fix placement of "n=$((n+1)" for two test cases.
In the cases where we test SOA serial updates and TTL updates, we check
if for "all zones loaded" to ensure the new zone content is loaded. But
this is the unsigned zone, the signed zone still needs to be produced.
There is thus a timing issue where the dig request comes in before
the signing process has finished.
Add a retry quiet to mitigate against it.
7249bad7 introduced the -c option to stat(1) command, but BSD systems
do not know about it. Replace the stat(1) command with a PERL script
that achieves the same.
Why PERL? For consistency purposes, there are more places in the
system test where we use the same method.
Add a test case that triggers a keymgr run that will not trigger any
metadata changes. Ensure that the last status change of the key files
is unmodified.
- Removed all code that only runs under CYGWIN, and made all
code that doesn't run under CYGWIN non-optional.
- Removed the $TP variable which was used to add optional
trailing dots to filenames; they're no longer optional.
- Removed references to pssuspend and dos2unix.
- No need to use environment variables for diff and kill.
- Removed uses of "tr -d '\r'"; this was a workaround for
a cygwin regex bug that is no longer needed.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Replace most "master/slave" terminology in tests with the preferred
"primary/secondary", with the following exceptions:
- When testing the old syntax
- When master is used in master file and master file format terms
- When master is used in hostmaster or postmaster terms
- When master used in legacy domain names (for example in dig.batch)
- When there is no replacement (for example default-masters)
The function 'private_type_record()' is now used in multiple system
setup scripts and should be moved to the common configuration script
conf.sh.common.
Add a test for default.kasp that if we remove the private key file,
no successor key is created for it. We need to update the kasp script
to deal with a missing private key. If this is the case, skip checks
for private key files.
Add a test with a zone for which the private key of the ZSK is missing.
Add a test with a zone for which the private key of the KSK is missing.
Add a test case when a dnssec-policy is reconfigured to "none",
without setting it to "insecure" first. This is unsupported behavior,
but we want to make sure the behavior is somewhat expected. The
zone should remain signed (but will go bogus once the signatures
expire).
