In order to run the shell system tests, the pytest runner has to pick
them up somehow. Adding an extra python file with a single function
for the shell tests for each system test proved to be the most
compatible way of running the shell tests across older pytest/xdist
versions.
Modify the legacy run.sh script to ignore these pytest-runner specific
glue files when executing tests written in pytest.
(cherry picked from commit 2f5bf6d971)
(manually added host/tests_sh_host.py, tkey/tests_sh_tkey.py on top)
Send the test message from ns3 to ns2 instead of ns2 to ns3 as ns2
is started first and therefore the test doesn't have to wait on the
resend of the the NOTIFY message to be successful.
(cherry picked from commit e7e1f59a3a)
check in the log files of receiving servers that the originating
ports for notify and SOA query messages were set correctly from
configured notify-source and transfer-source options.
(cherry picked from commit 9cffd5c431)
The system test should never attempt to start or stop any other server
than those that belong to that system test. Therefore, it is not
necessary to specify the system test name in function calls.
Additionally, this makes it possible to run the test inside a
differently named directory, as its name is automatically detected with
the $SYSTESTDIR variable. This enables running the system tests inside a
temporary directory.
Direct use of stop.pl was replaced with a more systematic approach to
use stop_servers helper function.
(cherry picked from commit c100308b7d)
There were two problems in the notify system test when it waited for
log messages to appear: the shellcheck refactoring introduced a call
to `wait_for_log` with a regex, but `wait_for_log` only supports fixed
strings, so it always ran for the full 45 second timeout; and the new
test to ensure that notify messages time out failed to reset the
nextpart pointer, so if the notify messages timed out before the test
ran, it would fail to see them.
This change adds a `wait_for_log_re` helper that matches a regex, and
uses it where appropriate in the notify system test, which stops the
test from waiting longer than necessary; and it resets the nextpart
pointer so that the notify timeout test works reliably.
Closes#3275
(cherry picked from commit 4a30733ae5)
There are a couple of problems with dns_request_createvia(): a UDP
retry count of zero means unlimited retries (it should mean no
retries), and the overall request timeout is not enforced. The
combination of these bugs means that requests can be retried forever.
This change alters calls to dns_request_createvia() to avoid the
infinite retry bug by providing an explicit retry count. Previously,
the calls specified infinite retries and relied on the limit implied
by the overall request timeout and the UDP timeout (which did not work
because the overall timeout is not enforced). The `udpretries`
argument is also changed to be the number of retries; previously, zero
was interpreted as infinity because of an underflow to UINT_MAX, which
appeared to be a mistake. And `mdig` is updated to match the change in
retry accounting.
The bug could be triggered by zone maintenance queries, including
NOTIFY messages, DS parental checks, refresh SOA queries and stub zone
nameserver lookups. It could also occur with `nsupdate -r 0`.
(But `mdig` had its own code to avoid the bug.)
(cherry picked from commit 71ce8b0a51)
- Removed all code that only runs under CYGWIN, and made all
code that doesn't run under CYGWIN non-optional.
- Removed the $TP variable which was used to add optional
trailing dots to filenames; they're no longer optional.
- Removed references to pssuspend and dos2unix.
- No need to use environment variables for diff and kill.
- Removed uses of "tr -d '\r'"; this was a workaround for
a cygwin regex bug that is no longer needed.
(cherry picked from commit 1d706f328c)
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Replace most "master/slave" terminology in tests with the preferred
"primary/secondary", with the following exceptions:
- When testing the old syntax
- When master is used in master file and master file format terms
- When master is used in hostmaster or postmaster terms
- When master used in legacy domain names (for example in dig.batch)
- When there is no replacement (for example default-masters)
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
this changes most visble uses of master/slave terminology in tests.sh
and most uses of 'type master' or 'type slave' in named.conf files.
files in the checkconf test were not updated in order to confirm that
the old syntax still works. rpzrecurse was also left mostly unchanged
to avoid interference with DNSRPS.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
test the average delay between notifies instead of the minimum delay;
this helps avoid unnecessary test failures on systems with bursty
network performance.
- all tests with "recursion yes" now also specify "dnssec-validation yes",
and all tests with "recursion no" also specify "dnssec-validation no".
this must be maintained in all new tests, or else validation will fail
when we use local root zones for testing.
- clean.sh has been modified where necessary to remove managed-keys.bind
and viewname.mkeys files.
- wait for the transfer completion message to apear in the log instead
of the notify message. this ensures we don't check for the presense of
transfered records during the time between the notify and the
transfer.
- removed a few remaing places where output wasn't being passed
through echo_i or cat_i
- added a "digcomp" function to conf.sh.in to send digcomp.pl output
through cat_i and return the correct exit value
- set SYSTESTDIR when calling echo_i from nsX directories, so that
the test name will always be printed correctly
- fixed a test name typo in conf.sh.in
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
Conflicts:
bin/tests/system/conf.sh.in
lib/dns/win32/libdns.def.in
lib/isc/win32/file.c
The merge also needed to update files in legacy and tcp system tests
(newly introduced in master after branch was created) to introduce use
of lockfile.
startup-notify-rate instead of serial-query-rate.
[RT #24454]
3955. [bug] Notify messages due to changes are no longer queued
behind startup notify messages. [RT #24454]
