New version of clang (19) has introduced a stricter checks when mixing
integer (and float types) with enums. In this case, we used enum {}
as C17 doesn't have constexpr yet. Change the time conversion constants
to be static const unsigned int instead of enum values.
Some distributions (notably, debian bookworm) have deprecated the
`python` interpreter in favor of `python3`. Since our scripts are
python3 anyway, use the proper numbered version in shebang to make
scripts easily executable.
As we now setup the logging very early, parsing the default config would
always print warnings about experimental (and possibly deprecated)
options in the default config. This would even mess with commands like
`named -V` and it is also wrong to warn users about using experimental
options in the default config, because they can't do anything about
this. Add CFG_PCTX_NODEPRECATED and CFG_PCTX_NOEXPERIMENTAL options
that we can pass to cfg parser and silence the early warnings caused by
using experimental options in the default config.
This condition in catalog zone processing functions is checked only
for sanity, so there is no meaning for a log message that normally
shouldn't be ever logged.
Catalog zone member zones should be reconfigured as all the other
zones during a reconfiguration. Test it by checking whether the newly
added allow-query setting affects a member zone.
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
MAX_RESTARTS is no longer hard-coded; ns_server_setmaxrestarts()
and dns_client_setmaxrestarts() can now be used to modify the
max-restarts value at runtime. in both cases, the default is 11.
the number of steps that can be followed in a CNAME chain
before terminating the lookup has been reduced from 16 to 11.
(this is a hard-coded value, but will be made configurable later.)
Instead of calling dst_lib_init() and dst_lib_destroy() explicitly by
all the programs, create a separate memory context for the DST subsystem
and use the library constructor and destructor to initialize the DST
internals.
The question section should be present in the first AXFR/IXFR
response and in other QUERY responses unless no question was sent.
Issue a warning if the question section is not present.
OpenSSL_version() first appeared in OpenSSL 1.1.0 and have been
available since LibreSSL 2.7.1 and OpenBSD 6.3, thus we can remove the
compatibility shims with older versions that are not supported anymore.
Since the support for OpenSSL Engines has been removed, we can now also
remove the checks for OPENSSL_API_LEVEL; The OpenSSL 3.x APIs will be
used when compiling with OpenSSL 3.x, and OpenSSL 1.1.xx APIs will be
used only when OpenSSL 1.1.x is used.
The OpenSSL 1.x Engines support has been deprecated in the OpenSSL 3.x
and is going to be removed. Remove the OpenSSL Engine support in favor
of OpenSSL Providers.
The isc_mem_create() in printversion() was created outside of an #ifdef
HAVE_GEOIP, but destroyed inside the #ifdef; move it to the outside of
the #ifdef where it belongs.
This is really a nit as we immediately exit() after printing the
versions, but I found it and it would bug me for the rest of my life.
dns_difftuple_create() could only return success, so change
its type to void and clean up all the calls to it.
other functions that only returned a result value because of it
have been cleaned up in the same way.
There isn't a realistic reason to ever use e = 4294967297. Fortunately
its codepath wasn't reachable to users and can be safetly removed.
Keep in mind the `dns_key_generate` header comment was outdated. e = 3
hasn't been used since 2006 so there isn't a reason to panic. The
toggle was the public exponents between 65537 and 4294967297.
Since the minimal OpenSSL version is now OpenSSL 1.1.1, remove all kind
of OpenSSL shims and checks for functions that are now always present in
the OpenSSL libraries.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Aydın Mercan <aydin@isc.org>
The dst_lib_destroy() should be called only if dst_lib_init() was called
before. In named-checkconf, that is guarded by dst_cleanup variable
that was erroneously set to true by default. Set the dst_cleanup to
'false' by default.
Add a system test that sets TSIG fudge to 0, waits three seconds and
then sends signed message to the server. This tests the path where the
time difference between the client and the server is outside of the TSIG
fudge value.
The system tests were overriding the local locale by setting LANG to C.
This does not override the locale in case there are individual LC_<*>
variables like LC_CTYPE explicitly set.
Use LC_ALL=C instead which is the proper way of overriding all currently
set locales.
When automatic-interface-scan is disabled, the route socket was still
being opened. Add new API to connect / disconnect from the route socket
only as needed.
Additionally, move the block that disables periodic interface rescans to
a place where it actually have access to the configuration values.
Previously, the values were being checked before the configuration was
loaded.
If bufsize overflows we will have an infinite loop. In practice
this will not happen unless we have made a coding error. Add an
INSIST to detect this condition.
181retry:
182 isc_buffer_allocate(mctx, &b, bufsize);
183 result = dns_rdata_totext(rdata, NULL, b);
184 if (result == ISC_R_NOSPACE) {
185 isc_buffer_free(&b);
CID 498031: (#1 of 1): Overflowed constant (INTEGER_OVERFLOW)
overflow_const: Expression bufsize, which is equal to 0, overflows
the type that receives it, an unsigned integer 32 bits wide.
186 bufsize *= 2;
187 goto retry;
188 }
If size overflows we will have an infinite loop. In practice
this will not happen unless we have made a coding error. Add
an INSIST to detect this condition.
181 while (!done) {
182 isc_buffer_allocate(mctx, &b, size);
183 result = dns_rdata_totext(rdata, NULL, b);
184 if (result == ISC_R_SUCCESS) {
185 printf("%.*s\n", (int)isc_buffer_usedlength(b),
186 (char *)isc_buffer_base(b));
187 done = true;
188 } else if (result != ISC_R_NOSPACE) {
189 check_result(result, "dns_rdata_totext");
190 }
191 isc_buffer_free(&b);
CID 498025: (#1 of 1): Overflowed constant (INTEGER_OVERFLOW)
overflow_const: Expression size, which is equal to 0, overflows the type that
receives it, an unsigned integer 32 bits wide.
192 size *= 2;
193 }
Use a big zone and the slow transfer mode. Initiate a retransfer, wait
several seconds, then initiate a retransfer using a '-force' argument,
which should cancel the previous transfer and start a new one.
Update the CNAME chain test to correspond to the changed behavior,
because now named returns SERVFAIL when hitting the maximum query
restarts limit (e.g. happening when following a long CNAME chain).
In the current test auth will hit the limit and return partial data
with a SERVFAIL code, while the resolver will return no data with
a SERVFAIL code after auth returns SERVFAIL to it.
Ensure all the variables are initialized when running the main function
of isctest module. This enables proper environment variables during test
script development when only conf.sh is sourced, rather than the script
being executed by the pytest runner.
Run the crypto support checks when initializing the isctest package and
save those results in environment variable. This removes the need to
repeatedly check for crypto operation support, as it's not something
that would change at test runtime.
Instead of invoking get_algorithms.py script repeatedly (which may yield
different results), move the algorithm configuration to an isctest
module. This ensures the variables are consistent across the entire test
run.
Some external log file rotation programs use signals to tell programs
to close log files. SIGHUP can be used to do this but it also does
a full reconfiguration. Configure named to accept SIGUSR1 as a
signal to close log files.
The updatecheck-kskonly.secure zone is being used to test dynamic
updates while the KSK is offline. It ensures that the DNSKEY RRset
will retain the RRSIG record, while the updated data is being signed
with the currently active ZSK.
When walking through ZSK rollovers, ensure that the newest ZSK (ZSK3)
is published before doing the dynamic update, preventing timing
related test failures.
Also fix the test log line ($ZSK_ID3 was not yet created at the time
of logging).
The key lifetime should no longer be adjusted if the key is being
retired earlier, for example because a manual rollover was started.
This would falsely be seen as a dnssec-policy lifetime reconfiguration,
and would adjust the retire/removed time again.
This also means we should update the status output, and the next
rollover scheduled is now calculated using (retire-active) instead of
key lifetime.
View matching on an incoming query checks the query's signature,
which can be a CPU-heavy task for a SIG(0)-signed message. Implement
an asynchronous mode of the view matching function which uses the
offloaded signature checking facilities, and use it for the incoming
queries.
This is a tiny helper function which is used only once and can be
replaced with two function calls instead. Removing this makes
supporting asynchronous signature checking less complicated.
In order to protect from a malicious DNS client that sends many
queries with a SIG(0)-signed message, add a quota of simultaneously
running SIG(0) checks.
This protection can only help when named is using more than one worker
threads. For example, if named is running with the '-n 4' option, and
'sig0checks-quota 2;' is used, then named will make sure to not use
more than 2 workers for the SIG(0) signature checks in parallel, thus
leaving the other workers to serve the remaining clients which do not
use SIG(0)-signed messages.
That limitation is going to change when SIG(0) signature checks are
offloaded to "slow" threads in a future commit.
The 'sig0checks-quota-exempt' ACL option can be used to exempt certain
clients from the quota requirements using their IP or network addresses.
The 'sig0checks-quota-maxwait-ms' option is used to define a maximum
amount of time for named to wait for a quota to appear. If during that
time no new quota becomes available, named will answer to the client
with DNS_R_REFUSED.
kasp-max-types-per-name (named2.conf.in):
An unsigned zone with RR type count on a name right below the
configured limit. Then sign the zone using KASP. Adding a RRSIG would
push it over the RR type limit per name. Signing should fail, but
the server should not crash, nor end up in infinite resign-attempt loop.
kasp-max-records-per-type-dnskey (named1.conf.in):
Test with low max-record-per-rrset limit and a DNSSEC policy requiring
more than the limit. Signing should fail.
kasp-max-types-per-name (named1.conf.in):
Each RRSIG(covered type) is counted as an individual RR type. Test the
corner case where a signed zone, which is just below the limit-1,
adds a new type - doing so would trigger signing for the new type and
thus increase the number of "types" by 2, pushing it over the limit
again.
Add two new masterformat tests that use signing. In the case of
'under-limit-kasp', the signing will keep the number of records in the
RRset under the limit. In the case of 'on-limit-kasp', the signing
will push the number of records in the RRset over the limit, because
of the added RRSIG record.
Send a recursive query for a large number of RRsets, which should
fail when using the default max-types-per-name setting of 100, but
succeed when the cap is disabled.
Previously, the number of RR types for a single owner name was limited
only by the maximum number of the types (64k). As the data structure
that holds the RR types for the database node is just a linked list, and
there are places where we just walk through the whole list (again and
again), adding a large number of RR types for a single owner named with
would slow down processing of such name (database node).
Add a configurable limit to cap the number of the RR types for a single
owner. This is enforced at the database (rbtdb, qpzone, qpcache) level
and configured with new max-types-per-name configuration option that
can be configured globally, per-view and per-zone.
Send a recursive query for a large (2500 record) RRset, which should
fail when using the default max-records-per-type setting of 100, but
succeed when the cap is disabled.
Add two new masterformat tests - the 'huge' zone fits within the ns1
limit and loads on the primary ns1 server, but must not transfer to the
ns2 secondary, and the 'uber' zone should not even load on the primary
ns1 server.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
Changed the default value for 'allow-transfer' to 'none'; zone
transfers now require explicit authorization.
Updated all system tests to specify an allow-transfer ACL when needed.
Revised the ARM to specify that the default is 'none'.
When in -4 mode check that "IPv6 disabled and no IPv4 primaries"
is logged and when in -6 mode check that "IPv4 disabled and no IPv6
primaries" is logged.
The times it takes to run tests CI vary significantly enough
that it makes hypothesis test reach their deadlines and fail randomly
marking the tests as flaky.
This commit disables the deadlines when running in CI.
The most important being `dns_names` that generates dns.name.Name
objects based on given paramaters.
No guarantees are given when it comes the uniformity of generated
samples, however it plays nicely with the hypothesis' shrinking
algorithm.
Once we use hypothesis more widely (in at least one more test) this file
should be moved for it to be reused easily.
Check for more rcodes and various properties needed in the wildcard
test. Add a `name` module for various dns.name.Name operations (with
`prepend_label` function only now).
Expose `timeout` as a parameter of `query.tcp`/`query.udp`.
- duplicated question
- duplicated answer
- qtype as an answer
- two question types
- question names
- nsec3 bad owner name
- short record
- short question
- mismatching question class
- bad record owner name
- mismatched class in record
- mismatched KEY class
- OPT wrong owner name
- invalid RRSIG "covers" type
- UPDATE malformed delete type
- TSIG wrong class
- TSIG not the last record
An obscured DNSKEY RRset at a delegation was incorrectly added to
the NSEC/NSEC3 type bit map leading to zone verification failures.
This adds such a RRset to the test zone.
DNSSEC only works when DNSKEYs are self signed. This only occurs
when the DNSKEY RRset is at the apex. Cause dnssec-signzone to
fail if it attempts to sign an non-apex DNSKEY RRset.
